Q: How long will my magnet last?
A: With proper care and use, custom car magnets can be used for about two years. At that point, we strongly recommend replacing your magnet to prevent it from falling off your vehicle while you drive.
Q: Should I match my car magnet to the color of my vehicle?
A: We recommend that you create an advertising magnet in a different (yet complementary) color. Not only does this help your magnet stand out to people, it’s the easiest way to create a consistent look across multiple vehicles of differing colors. Just make sure you keep your messaging and design simple and clear.
Q: Can I put a magnet on a new paint job?
A: No, you’ll want to wait for your paint to cure – and this is also the case with a new clear coat or wax job. The recommended wait time is 90 days for a new coat of paint, 60 days for a clear coat and 2 days for wax.
Q: Do your car magnets stick to all vehicles?A: Like all magnets, our car magnets stick to ferromagnetic metals, including iron, steel, nickel and cobalt. They will not stick to aluminum, fiberglass, wood, plastic, etc.
Q: How often should I remove the magnet from my vehicle?
A: We recommend removing your magnet weekly and cleaning the back of it and the exterior of your vehicle with a damp cloth and mild detergent. This will extend the longevity of your magnet and protect the vehicle surface from damage, moisture and debris build up.
Q: Will the car magnet remove the paint from my vehicle?
A: Applying any material to a painted surface without following the instruction guide above may result in damage to the surface.
Q: Can the vehicle magnet withstand all weather conditions?
A: We recommend not using the magnet during extreme weather conditions (temperatures exceeding 160° F or below -15° F).
Q: Do I need to remove the magnet before washing my car?
A: Yes. We recommend removing it before any professional car washes or power washing to avoid damage to the vehicle surface.
Q: Where and how should I place my magnet?
A: Apply the magnet to a flat metallic surface, (without any bumps, curves or molding/rust). You will know the magnet is properly installed if it adheres to the surface, if there are no air bubbles between the magnet & the vehicle surface, and if the magnet (including the corners) is flat against the surface.
